2013

RESET FILTERS    Category:   
Product Type:
MNS ISO 13791:2013
MNS ISO 13791:2013
Thermal performance of buildings. Calculation of internal temperatures of a room in summer without mechanical cooling. General criteria and validation procedures
MNS ISO 13792:2013
MNS ISO 13792:2013
Thermal performance of buildings. Calculation of internal temperatures of a room in summer without mechanical cooling. Simplified methods
MNS ISO 13793:2013
MNS ISO 13793:2013
Thermal performance of buildings. Thermal design of foundations to avoid frost heave
MNS ISO 14683:2013
MNS ISO 14683:2013
Thermal bridges in building construction. Linear thermal transmittance. Simplified methods and default values
MNS ISO 15927-1:2013
MNS ISO 15927-1:2013
Hydrothermal performance of buildings. Calculation and presentation of climatic data Part 1: Monthly means of single meteorological elements
MNS ISO 15927-2:2013
MNS ISO 15927-2:2013
Hydrothermal performance of buildings. Calculation and presentation of climatic data SCIENCES Part 2:Hourly data for design cooling load
MNS ISO 15927-3:2013
MNS ISO 15927-3:2013
Hydrothermal performance of buildings. Calculation and presentation of climatic data Part 3: Calculation of a driving rain index for vertical surfaces from hourly wind and rain data
MNS ISO 15927-4:2013
MNS ISO 15927-4:2013
Hydrothermal performance of buildings. Calculation and presentation of climatic data Part 4: Hourly data for assessing the annual energy use for heating and cooling
MNS ISO 15927-5:2013
MNS ISO 15927-5:2013
Hydrothermal performance of buildings. Calculation and presentation of climatic data Part 5:Data for design heat load for space heating
MNS ISO 15927-6:2013
MNS ISO 15927-6:2013
Hydrothermal performance of buildings. Calculation and presentation of climatic data Part 6: Accumulated temperature differences (degree-days)
MNS ISO 16817:2013
MNS ISO 16817:2013
Building environment design. Indoor environment. Design process for visual environment
MNS ISO 21500:2013
MNS ISO 21500:2013
Guidance on project management
MNS ISO 21570:2013
MNS ISO 21570:2013
Foodstuffs. Methods of analysis for the detection of genetically modified organisms —Quantitative nucleic acid based methods
MNS ISO 21572:2013
MNS ISO 21572:2013
Foodstuffs. Methods for the detection of genetically modified organisms and derived products. Protein based methods
MNS ISO 21573-2:2013
MNS ISO 21573-2:2013
Building construction machinery and equipment -- Concrete pumps -- Part 2: Procedure for examination of technical parameters
MNS ISO 24276:2013
MNS ISO 24276:2013
Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. General requirements and definitions
MNS ISO 3766:2013
MNS ISO 3766:2013
Construction drawings. Simplified representation of concrete reinforcement
MNS ISO 4064-2:2013
MNS ISO 4064-2:2013
Measurement of water flow in fully charged closed conduits -- Meters for cold potable water and hot water -- Part 2: Installation requirements
MNS ISO 8686-2:2013
MNS ISO 8686-2:2013
Cranes -- Design principles for loads and load combinations -- Part 2: Mobile cranes
MNS ISO 8990:2013
MNS ISO 8990:2013
Thermal insulation. Determination of steady-state thermal transmission properties. Calibrated and guarded hotbox

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!