Documents by Year
1940s (1)
1950s (18)
1960s (383)
1970s (1367)
1980s (2170)
1990s (1259)
2000s (3381)
2010s (2172)
Other (12)

MNS

2013

MNS ISO 13791:2013
MNS ISO 13791:2013
Thermal performance of buildings. Calculation of internal temperatures of a room in summer without mechanical cooling. General criteria and validation procedures
MNS ISO 13792:2013
MNS ISO 13792:2013
Thermal performance of buildings. Calculation of internal temperatures of a room in summer without mechanical cooling. Simplified methods
MNS ISO 13793:2013
MNS ISO 13793:2013
Thermal performance of buildings. Thermal design of foundations to avoid frost heave
MNS ISO 14683:2013
MNS ISO 14683:2013
Thermal bridges in building construction. Linear thermal transmittance. Simplified methods and default values
MNS ISO 15927-1:2013
MNS ISO 15927-1:2013
Hydrothermal performance of buildings. Calculation and presentation of climatic data Part 1: Monthly means of single meteorological elements
MNS ISO 15927-2:2013
MNS ISO 15927-2:2013
Hydrothermal performance of buildings. Calculation and presentation of climatic data SCIENCES Part 2:Hourly data for design cooling load
MNS ISO 15927-3:2013
MNS ISO 15927-3:2013
Hydrothermal performance of buildings. Calculation and presentation of climatic data Part 3: Calculation of a driving rain index for vertical surfaces from hourly wind and rain data
MNS ISO 15927-4:2013
MNS ISO 15927-4:2013
Hydrothermal performance of buildings. Calculation and presentation of climatic data Part 4: Hourly data for assessing the annual energy use for heating and cooling
MNS ISO 15927-5:2013
MNS ISO 15927-5:2013
Hydrothermal performance of buildings. Calculation and presentation of climatic data Part 5:Data for design heat load for space heating
MNS ISO 15927-6:2013
MNS ISO 15927-6:2013
Hydrothermal performance of buildings. Calculation and presentation of climatic data Part 6: Accumulated temperature differences (degree-days)
MNS ISO 16817:2013
MNS ISO 16817:2013
Building environment design. Indoor environment. Design process for visual environment
MNS ISO 21500:2013
MNS ISO 21500:2013
Guidance on project management
MNS ISO 21570:2013
MNS ISO 21570:2013
Foodstuffs. Methods of analysis for the detection of genetically modified organisms —Quantitative nucleic acid based methods
MNS ISO 21572:2013
MNS ISO 21572:2013
Foodstuffs. Methods for the detection of genetically modified organisms and derived products. Protein based methods
MNS ISO 21573-2:2013
MNS ISO 21573-2:2013
Building construction machinery and equipment -- Concrete pumps -- Part 2: Procedure for examination of technical parameters
MNS ISO 24276:2013
MNS ISO 24276:2013
Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. General requirements and definitions
MNS ISO 3766:2013
MNS ISO 3766:2013
Construction drawings. Simplified representation of concrete reinforcement
MNS ISO 4064-2:2013
MNS ISO 4064-2:2013
Measurement of water flow in fully charged closed conduits -- Meters for cold potable water and hot water -- Part 2: Installation requirements
MNS ISO 8686-2:2013
MNS ISO 8686-2:2013
Cranes -- Design principles for loads and load combinations -- Part 2: Mobile cranes
MNS ISO 8990:2013
MNS ISO 8990:2013
Thermal insulation. Determination of steady-state thermal transmission properties. Calibrated and guarded hotbox
MNS ISO 9928-1:2013
MNS ISO 9928-1:2013
Cranes. Crane driving manual. Part1: General
MNS ISO 9928-2:2013
MNS ISO 9928-2:2013
Cranes. Crane driving manual. Part 2: Mobile crane operators
MNS ISO TR 25107:2013
MNS ISO TR 25107:2013
Non-destructive testing - HSE curriculum guide
MNS ISO/IEC 10022:2013
MNS ISO/IEC 10022:2013
Information technology. Open systems interconnection. Physical service definition
MNS ISO/IEC 14065:2013
MNS ISO/IEC 14065:2013
Greenhouse gases. Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition
MNS ISO/IEC 17020:2013
MNS ISO/IEC 17020:2013
Conformity assessment. Requirements for the operation of various types of bodies performing inspection
MNS ISO/IEC 17021:2013
MNS ISO/IEC 17021:2013
Conformity assessment. Requirements for bodies providing audit and certification of management systems
MNS ISO/IEC 17065:2013
MNS ISO/IEC 17065:2013
Conformity assessment. Requirements for bodies certifying products, processes and services
MNS ISO/IEC 18043:2013
MNS ISO/IEC 18043:2013
Information technology. Security techniques. Selection, deployment and operations of intrusion detection systems
MNS ISO/IEC 9545:2013
MNS ISO/IEC 9545:2013
Information technology. Open systems interconnection. Application Layer structure
MNS ISO/TR 25107:2013
MNS ISO/TR 25107:2013
Non-destructive testing -- Guidelines for NDT training syllabuses
MNS ISO10845-4:2013
MNS ISO10845-4:2013
Construction procurement-Part 4. Standard conditions for the calling for expressions of interest
MNS OIML D 1:2013
MNS OIML D 1:2013
Considerations for a Law on Metrology
Price: $5,030.10
MNS OIML R 23:2013
MNS OIML R 23:2013
Tire pressure gauges for motor vehicles
Price: $260.40
MNS OIML R 76-1:2013
MNS OIML R 76-1:2013
Non-automatic weighing instruments. Part 1: Metrological and technical requirements. Tests
Price: $6,932.70
MNS OIML R 76-2:2013
MNS OIML R 76-2:2013
Non-automatic weighing instruments. Part 2: Pattern evaluation report
Price: $1,516.80

All Codes and Regulations

BD BN MSP UBB
BNBD MNS Other MN norms

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Projects of works (PPR) on bridges Technical Supervision
Construction Price Formation ISO classifier Organization Standards PromExpert Welding regulations
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Power industry Standards for pipe fittings (TPA)

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!